| HCLConcordGolf.com HCLConcord Golf brings golfers high quality, well designed golf clubs, including custom fitting at very affordable prices. |
|
|
||
|
Putters
All putters come with steel shafts. They are milled face to produce an absolutely flat
striking surface, from the heel to toe and from top to bottom. The polymer inserts provide a true end over
end roll quickly, right after the ball is struck, to prevent skidding. For a larger picture and
greater details, just click onto the appropriate spot.
Putters have a standard length of 34", for both men and women. These lengths can be adjusted
longer or shorter in increments of 1 inch.
- For a larger picture, or for ordering, just click onto the underlined portion
of the descriptions.
- K Center Shaft Putter, with milled white polymer face
insert RH
Price ea. - $33.00
Delivery - 3 to 5 business days
- The center shafted, shaft over hosel, putter is
designed for those who find it easier to determine the line to the hole with the shaft in the middle.
Although the concept is quite old, it is still a popular method of alignment with many players.
- The head is made of 431 stainless steel, equipped with a
white polymer face insert that is milled for a true end over end roll. The specs are:- Loft - 3 deg.;
Lie angle - 72 deg.; Face height - 26 mm; Distance from heel to toe - 113 mm. The head weight is 345
grams - heavy enough to allow the player to reach the hole without having to make an excessively long
stroke.
- These are steel shafted and come with Lamkin paddle
grips.
- Inazone T + Putter, mallet construction, with milled face polymer
insert RH
- Price ea. - $28.00
- Delivery - 3 to 5 business days
- The T+ putter incorporates a rear and girding mallet ring
that gives the player the ease of takeaway normal with mallets, while placing weight at both the heel
and toe to limit twist on off center hits. The face is milled for flatness in all directions to
produce an end over end roll without initial skidding. The loft is 3 degrees; and the lie is 72
degrees. The material is 431 stainless steel.
- The center bubble adds weight directly behind the ball at impact. This
allows the player to stroke the ball with ease on longer putts without having to resort to a mini
swing that may pull him out of the shot.
- The putter comes with a straight steel shaft. The player may choose between
a smaller Pro- T black grip or the larger Lamkin paddle grip, whichever is more comfortable, by
indicating his selection in the "comments" portion of the order form.
- Zentra Mallet Putter, with milled polymer
face insert RH
- Price ea. - $31.00
- Delivery - 3 to 5 business days
- The Zentra putter is at 2 degrees loft; 72 degrees lie angle. It has three sighting
arrows on top to make aiming easy. The polymer insert ensures a true roll of the ball.
- It is equipped with a straight steel shaft and a Lamkin paddle grip. The overall
balance makes the club easy to take back, and easy to stroke, without being pulled off line. The head
is somewhat heavy (345 grams) to permit the player to roll long putts without having to make an
excessively long stroke.
- EZ Roll mallet type putter, with milled face polymer insert, 4 degrees
loft RH
- Price ea. - $39.00 - Delivery - 3 to 5 business days 
- The EZ Roll putter is an alternate to the Zentra putter above. It is with a
heavier 380 gram head so the
player can make a smooth stroke on a long putt with a short backswing. - At 4 degrees loft, it will help get the ball on top of Poa Annua (Poanna) grasses found in invasive patches now on many courses.
- The specs. are:- Loft - 4 deg., Lie - 72 deg., Face height - 25.4 mm, Face width
- 96 mm,
Head weight - 380 grams., Head material - 431 stainless steel.
- Typical of mallets, the EZ Roll is easy to take back without twist, promoting on
line strokes. The
milled polymer face insures a true end over end roll without initial
ball skidding in the grass.
- The putter comes with a steel shaft and a Lamkin paddle grip.
Z - 240 Mallet Style Putter, with polymer insert milled face, 3 degs.
loft RH
- This putter has a heavy 380 gram head to enable the player to reach the hole
easily, without having to
take a mini swing. The ring like construction limits twist on off center hits. The long
rear sighting line helps
the player find the proper line to the cup. When the player makes the short sighting line
on top line up
with the long rear line he ensures that his eyes are above the ball in the correct
position to make a stroke.
This putter comes with a steel shaft and Lamkin paddle style
grip.
- Price - $49.00
- Delivery - 3 to 5 business days.
| ||
Club Fitting Information Who is Harry Lundberg? Contact Us
|